Mcu firmware is outdated extension full guides for download and update
Frequently asked questions about the hawacorp.vn Nano S firmware update are answered below. For step by step instructions, please refer khổng lồ our update guide.
Bạn đang xem: Mcu firmware is outdated extension full guides for download and update
Important
Make sure your 24-word recovery phrase is securely stored và accessible. In rare cases, a device may be remix during the update & needs to lớn be restored after.
If you have sầu already set up your hawacorp.vn Nano S before this firmware update. Please follow the instructions below:
Choose the option Use initialized device in hawacorp.vn Live.Disconnect the hawacorp.vn Nano S.Press the button near the USB port of the hawacorp.vn Nano S and keep it pressed while you reconnect the cable.Release the button when Bootloader is displayed on the device.Cliông chồng Skip this step as shown in the screenshot below.Proceed with the instructions lớn finalize the update below.
Follow these steps if your device is stuchồng on Bootloader:
mở cửa hawacorp.vn Live.On Windows:Right-cliông xã hawacorp.vn Live & run as an Administrator.Connect your hawacorp.vn Nano S.Go to the Manager tab of hawacorp.vn Live desktop & click onContinue.
If the loader is at 100% and the device stays stuông chồng on Bootloader:Windows/Linux:Restart hawacorp.vn Live sầu by pressing CTRL + R. Then start the repair tool once more.MacOS:Restart hawacorp.vn Live sầu by pressing ⌘ + R. Then start the repair tool once more.
This issue is normally fixed using the instructions below:
Press both buttons simultaneously so you see Identifier...Press both buttons again so you see The device will run in unsafe mode.Press both buttons one final time. You may be able to lớn access the Dashboard. If you cannot, proceed khổng lồ the repair tool instructions below.Use the repair tool if it still displaysMCU firmware is not genuineIf you cannot access the dashboard by pressing both buttons three times:
Open the device repair tool by going inlớn the Manager & waiting for the blueRepair button, or open it directly from:Settings > Help > Repair your hawacorp.vn device.Connect your hawacorp.vn Nano S.In hawacorp.vn Live, select MCU firmware is not genuine and cliông chồng Repair. The repair process will start. If the hawacorp.vn Nano S is still displaying MCU firmware is not genuine, press both buttons three times, the device will then display the Dashboard and the update can continue.If the loader is at 100% và the device stays stuck on Bootloader:Windows/Linux: Restart hawacorp.vn Live by pressing CTRL + R. Then start the repair tool once more.MacOS: Restart hawacorp.vn Live sầu by pressing ⌘ + R. Then start the repair tool once more.This issue is normally fixedusing the device repair tool in hawacorp.vn Live sầu.
mở cửa the device repair tool by going into lớn the Manager và waiting for the blueRepair button, or open it directly from:Settings > Help > Repair your hawacorp.vn device.Connect your hawacorp.vn Nano S.In hawacorp.vn Live sầu, select MCU firmware is outdated and clichồng Repair. The repair process will start.This message means your device is ready for the last step of the update.
Disconnect the hawacorp.vn Nano S.Go lớn the Manager in hawacorp.vn Live sầu.Press the button near the USB port of the hawacorp.vn Nano S và keep it pressed while you reconnect the USB cable.Release the button when Bootloader is displayed on the device.The update process will continue automatically. hawacorp.vn Live sầu will display multiple progress loaders, while your hawacorp.vn Nano S displaysBootloader,UpdateandProcessing. Your device is successfully updated once hawacorp.vn Live sầu displaysFirmware updated.This issue is normally fixedusing the device repair tool in hawacorp.vn Live sầu.
Xem thêm:
Windows 7
Please note that hawacorp.vn Live sầu is not hawacorp.vned on Windows 7. If the solutions provided below bởi vì not solve your problem, we cannot provide any further tư vấn unless you try on a hawacorp.vned platkhung (macOS 10.9 (64-bit), Windows 8.1 (64-bit) or Linux Ubuntu 16.10).
How lớn fix a blank screen in hawacorp.vn Live sầu on Windows 7?Some users have reported that rebooting their computer in Safe mode with networking allowed them to update their hawacorp.vn Nano S. Learn more here. hawacorp.vn cannot provide any other solution.
Windows doesn"t recognize the device. How to lớn fix this?
OpenDevices & Printersfrom Control Panel.Double-clichồng Nano S& open theHardware tab.Select USB Input Device& cliông xã Properties.Clichồng Change Settings.Clichồng the Driver tab.Cliông xã Update driver & select automatic driver selection.Repeat this for both USB Input Devices.If during the hawacorp.vn Nano S update to lớn firmware version 1.6.1, your device is stuông chồng on Update & hawacorp.vn Live displays the error message: Unknown error(0x6984), follow the instructions below:
Make sure you have sầu the lachạy thử version of hawacorp.vn Live.Connect your device, without pressing any button.The device displays Update.Go to lớn the Manager tab in hawacorp.vn Live.hawacorp.vn Live resumes the update from where it was interrupted.If your device got reset
If your device displays theWelcome screen& usage instructions, it has been reset. Don"t worry, your cryplớn assets are safe as long as you have your 24-word recovery phrase. Select the Restore from recovery phrase option & press both buttons lớn validate.Thenrestore your private keysfrom your recovery phrase.
Still not solved?
If your problem is still not solved, there is probably a connection issue:
General questions
The private keys on your device are fully backed up by the 24-word recovery phrase. As long as your recovery phrase is securely stored, there is no risk khổng lồ your assets.
How to lớn update a hawacorp.vn Nano S?
Please refer to our update guidefor step-by-step instructions.
Do I need to update my hawacorp.vn Nano S?
Yes, we strongly recommover always updating your device lớn the lademo firmware version to lớn benefit from the optimal security màn chơi & user experience offered by our products.
What changes are included in the update?
Please refer to our blog post.
Do I have khổng lồ update my hawacorp.vn Nano S if I am not using it?
We recommend regularly updating your devices khổng lồ benefit from the optimal security level and user experience offered by our products. New (versions of) applications are also only available on the lademo firmware version.
Is it possible khổng lồ downgrade thefirmware?
No. For security reasons, it is not possible to lớn downgrade the firmware of your hawacorp.vn Nano S.
Xem thêm: Người Lớn Tuổi Thích Gì - Kinh Nghiệm Chọn Quà Tặng Cho Người Lớn Tuổi
Why didn"t my hawacorp.vn Nano S prompt to check the Identifier?
Three screens are shown in anautomatedloop. If the right button is pressed before the other screens are shown, the update will be installed before you could have checked the identifier. As long as the update is fully installed you can continue using your device.
